Interferon-tau (IFN-τ) Has Antiproliferative Effects, Induces Apoptosis, and Inhibits Tumor Growth in a Triple-negative Breast Cancer Murine Tumor Model.

BACKGROUND/AIM: Resistant triple-negative breast cancer (TNBC) is a subtype of this disease that is resistant to conventional chemotherapy agents. IFN-τ is a cytokine that has recently been shown to have immunoregulatory and antitumor effects. The present study aimed to examine the antiproliferative and apoptosis effects of IFN-τ in breast cancer cells and the antitumor effect in a murine tumor model of TNBC. MATERIALS AND METHODS: Murine breast cancer 4T1 cells were cultured and treated with ovine IFN-τ and through MTT and Caspase-Glo 3/7 assays, viability and cell death were determined. In addition, the antitumor effect of IFN-τ was determined in a murine tumor model of TNBC. RESULTS: Ovine IFN-τ showed a concentration-dependent antiproliferative effect on 4T1 murine breast cancer cells. Also, treatment of 4T1 cells with IFN-τ induced the activation of caspase 3 and 7, which is indicative of apoptotic cell death. Moreover, we detected an increase in the expression of type I interferon receptor (IFNAR1/2) in cells treated with IFN-. The intratumoral application of IFN-τ in mice inhibited tumor growth compared to the control non-treated group, and the effect was associated with the increased expression of GM-CSF. CONCLUSION: Ovine IFN-τ may be an effective immunotherapeutic cytokine for the treatment of TNBC.

Emergence of preparatory dynamics in VIP interneurons during motor learning.

To determine what actions to perform in each context, animals must learn how to execute motor programs in response to sensory cues. In rodents, the interface between sensory processing and motor planning occurs in the secondary motor cortex (M2). Here, we investigate dynamics in vasointestinal peptide (VIP) and somatostatin (SST) interneurons in M2 during acquisition of a cue-based, reach-to-grasp (RTG) task in mice. We observe the emergence of preparatory activity consisting of sensory responses and ramping activation in a subset of VIP interneurons during motor learning. We show that preparatory and movement activities in VIP neurons exhibit compartmentalized dynamics, with principal component 1 (PC1) and PC2 reflecting primarily movement and preparatory activity, respectively. In contrast, we observe later and more synchronous activation of SST neurons during the movement epoch with learning. Our results reveal how VIP population dynamics might support sensorimotor learning and compartmentalization of sensory processing and movement execution.

Enhancing GAT-3 in thalamic astrocytes promotes resilience to brain injury in rodents.

Inflammatory processes induced by brain injury are important for recovery; however, when uncontrolled, inflammation can be deleterious, likely explaining why most anti-inflammatory treatments have failed to improve neurological outcomes after brain injury in clinical trials. In the thalamus, chronic activation of glial cells, a proxy of inflammation, has been suggested as an indicator of increased seizure risk and cognitive deficits that develop after cortical injury. Furthermore, lesions in the thalamus, more than other brain regions, have been reported in patients with viral infections associated with neurological deficits, such as SARS-CoV-2. However, the extent to which thalamic inflammation is a driver or by-product of neurological deficits remains unknown. Here, we found that thalamic inflammation in mice was sufficient to phenocopy the cellular and circuit hyperexcitability, enhanced seizure risk, and disruptions in cortical rhythms that develop after cortical injury. In our model, down-regulation of the GABA transporter GAT-3 in thalamic astrocytes mediated this neurological dysfunction. In addition, GAT-3 was decreased in regions of thalamic reactive astrocytes in mouse models of cortical injury. Enhancing GAT-3 in thalamic astrocytes prevented seizure risk, restored cortical states, and was protective against severe chemoconvulsant-induced seizures and mortality in a mouse model of traumatic brain injury, emphasizing the potential of therapeutically targeting this pathway. Together, our results identified a potential therapeutic target for reducing negative outcomes after brain injury.

Highly Anisotropic Organometal Halide Perovskite Nanowalls Grown by Glancing-Angle Deposition.

Polarizers are ubiquitous components in current optoelectronic devices as displays or photographic cameras. Yet, control over light polarization is an unsolved challenge, since the main drawback of the existing display technologies is the significant optical losses. In such a context, organometal halide perovskites (OMHP) can play a decisive role given their flexible synthesis with tunable optical properties such as bandgap and photoluminescence, and excellent light emission with a low non-radiative recombination rate. Therefore, along with their outstanding electrical properties have elevated hybrid perovskites as the material of choice in photovoltaics and optoelectronics. Among the different OMHP nanostructures, nanowires and nanorods have lately arisen as key players in the control of light polarization for lighting or detector applications. Herein, the fabrication of highly aligned and anisotropic methylammonium lead iodide perovskite nanowalls by glancing-angle deposition, which is compatible with most substrates, is presented. Their high alignment degree provides the samples with anisotropic optical properties such as light absorption and photoluminescence. Furthermore, their implementation in photovoltaic devices provides them with a polarization-sensitive response. This facile vacuum-based approach embodies a milestone in the development of last-generation polarization-sensitive perovskite-based optoelectronic devices such as lighting appliances or self-powered photodetectors.

Signaling in the Tomato Immunity against Fusarium oxysporum.

New strategies of control need to be developed with the aim of economic and environmental sustainability in plant and crop protection. Metabolomics is an excellent platform for both understanding the complex plant-pathogen interactions and unraveling new chemical control strategies. GC-MS-based metabolomics, along with a phytohormone analysis of a compatible and incompatible interaction between tomato plants and Fusarium oxysporum f. sp. lycopersici, revealed the specific volatile chemical composition and the plant signals associated with them. The susceptible tomato plants were characterized by the over-emission of methyl- and ethyl-salicylate as well as some fatty acid derivatives, along with an activation of salicylic acid and abscisic acid signaling. In contrast, terpenoids, benzenoids, and 2-ethylhexanoic acid were differentially emitted by plants undergoing an incompatible interaction, together with the activation of the jasmonic acid (JA) pathway. In accordance with this response, a higher expression of several genes participating in the biosynthesis of these volatiles, such as MTS1, TomloxC,TomloxD, and AOS, as well as JAZ7, a JA marker gene, was found to be induced by the fungus in these resistant plants. The characterized metabolome of the immune tomato plants could lead to the development of new resistance inducers against Fusarium wilt treatment.

Supported Porous Nanostructures Developed by Plasma Processing of Metal Phthalocyanines and Porphyrins.

The large area scalable fabrication of supported porous metal and metal oxide nanomaterials is acknowledged as one of the greatest challenges for their eventual implementation in on-device applications. In this work, we will present a comprehensive revision and the latest results regarding the pioneering use of commercially available metal phthalocyanines and porphyrins as solid precursors for the plasma-assisted deposition of porous metal and metal oxide films and three-dimensional nanostructures (hierarchical nanowires and nanotubes). The most advanced features of this method relay on its ample general character from the point of view of the porous material composition and microstructure, mild deposition and processing temperature and energy constrictions and, finally, its straightforward compatibility with the direct deposition of the porous nanomaterials on processable substrates and device-architectures. Thus, taking advantage of the variety in the composition of commercially available metal porphyrins and phthalocyanines, we present the development of metal and metal oxides layers including Pt, CuO, Fe2O3, TiO2, and ZnO with morphologies ranging from nanoparticles to nanocolumnar films. In addition, we combine this method with the fabrication by low-pressure vapor transport of single-crystalline organic nanowires for the formation of hierarchical hybrid organic@metal/metal-oxide and @metal/metal-oxide nanotubes. We carry out a thorough characterization of the films and nanowires using SEM, TEM, FIB 3D, and electron tomography. The latest two techniques are revealed as critical for the elucidation of the inner porosity of the layers.

3D Organic Nanofabrics: Plasma-Assisted Synthesis and Antifreezing Behavior of Superhydrophobic and Lubricant-Infused Slippery Surfaces.

Herein, we present the development of supported organic nanofabrics formed by a conformal polymer-like interconnection of small-molecule organic nanowires and nanotrees. These organic nanostructures are fabricated by a combination of vacuum and plasma-assisted deposition techniques to generate step by step, single-crystalline organic nanowires forming one-dimensional building blocks, organic nanotrees applied as three-dimensional templates, and the polymer-like shell that produces the final fabric. The complete procedure is carried out at low temperatures and is compatible with an ample variety of substrates (polymers, metal, ceramics; either planar or in the form of meshes) yielding flexible and low solid-fraction three-dimensional nanostructures. The systematic investigation of this progressively complex organic nanomaterial delivers key clues relating their wetting, nonwetting, and anti-icing properties with their specific morphology and outer surface composition. Water contact angles higher than 150° are attainable as a function of the nanofabric shell thickness with outstanding freezing-delay times (FDT) longer than 2 h at -5 °C. The role of the extremely low roughness of the shell surface is settled as a critical feature for such an achievement. In addition, the characteristic interconnected microstructure of the nanofabrics is demonstrated as ideal for the fabrication of slippery liquid-infused porous surfaces (SLIPS). We present the straightforward deposition of the nanofabric on laser patterns and the knowledge of how this approach provides SLIPS with FDTs longer than 5 h at -5 °C and 1 h at -15 °C.

Enhancing Moisture and Water Resistance in Perovskite Solar Cells by Encapsulation with Ultrathin Plasma Polymers.

A compromise between high power conversion efficiency and long-term stability of hybrid organic-inorganic metal halide perovskite solar cells is necessary for their outdoor photovoltaic application and commercialization. Herein, a method to improve the stability of perovskite solar cells under water and moisture exposure consisting of the encapsulation of the cell with an ultrathin plasma polymer is reported. The deposition of the polymer is carried out at room temperature by the remote plasma vacuum deposition of adamantane powder. This encapsulation method does not affect the photovoltaic performance of the tested devices and is virtually compatible with any device configuration independent of the chemical composition. After 30 days under ambient conditions with a relative humidity (RH) in the range of 35-60%, the absorbance of encapsulated perovskite films remains practically unaltered. The deterioration in the photovoltaic performance of the corresponding encapsulated devices also becomes significantly delayed with respect to devices without encapsulation when vented continuously with very humid air (RH > 85%). More impressively, when encapsulated solar devices were immersed in liquid water, the photovoltaic performance was not affected at least within the first 60 s. In fact, it has been possible to measure the power conversion efficiency of encapsulated devices under operation in water. The proposed method opens up a new promising strategy to develop stable photovoltaic and photocatalytic perovskite devices.

Cuidados paliativos en la enfermedad pulmonar intersticial difusa: resultados de una encuesta de ámbito nacional / Palliative Care in Diffuse Interstitial Lund Disease: Results of a Spanish Survey

Introducción: Las enfermedades pulmonares intersticiales difusas (EPID) y, concretamente, la fibrosis pulmonar idiopática, pueden tener un elevado impacto en la supervivencia de los pacientes. Recientes estudios destacan la necesidad de implementar los cuidados paliativos (CP) en el manejo del enfermo con EPID. El objetivo del estudio fue conocer la situación actual de los CP en nuestro país. Métodos: Se diseñó una encuesta de 36 preguntas, que abordaba los principales aspectos de los CP en el paciente con EPID. Esta encuesta fue remitida a través de correo electrónico a todos los miembros de la Sociedad Española de Neumología y Cirugía Torácica, cuya participación fue voluntaria. Resultados: Cientosesenta y cuatro participantes respondieron a la encuesta. El 98% manifestó tener interés en los CP, 46% habían recibido formación específica. El 44% refirió ser el responsable de los CP en sus pacientes EPID. El control de síntomas y la fase final de vida fueron los motivos más frecuentes de derivación a los equipos de CP. Referente a la fase final de vida el 78% refirió consensuar con los pacientes la limitación del esfuerzo terapéutico, el 35% realizar un documento de voluntades anticipadas y el 22% consensuar el lugar de fallecimiento. Conclusión: A pesar de la conocida necesidad del CP en los pacientes con EPID y el notable interés de los participantes de la encuesta en este tema, existen claras lagunas formativas y organizativas, que deberían ser contempladas para mejorar la atención sobre esta área de salud en los pacientes con EPID de nuestro país (AU)

Introduction: Interstitial lung diseases (ILD) and, in particular, idiopathic pulmonary fibrosis, may have a significant impact on patient survival. Recent studies highlight the need for palliative care (PC) in the management of ILD patients. The aim of this study was to determine the current situation of PC in patients in Spain. Methods: A 36-question survey addressing the main aspects of PC in ILD patients was designed. The survey was sent via email to all members of the Spanish Society of Pulmonology and Thoracic Surgery. Participation was voluntary. Results: One hundred and sixty-four participants responded to the survey. Ninety-eight percent said they were interested in PC, 46% had received specific training, and 44% reported being responsible for PC in their ILD patients. Symptom control and end-of-life stage were the most frequent reasons for referral to PC teams. Regarding end-of-life, 78% reported consensual agreement with patients on the limitation of therapeutic efforts, 35% helped prepare an end-of-life advance directive, and 22% agreed on the place of death. Conclusion: Despite the well-known need for PC in patients with ILD and the notable interest of the survey participants in this subject, there are clear formative and organizational gaps that should be addressed to improve care in this area in ILD patients in Spain (AU)

Palliative Care in Diffuse Interstitial Lund Disease: Results of a Spanish Survey. / Cuidados paliativos en la enfermedad pulmonar intersticial difusa: resultados de una encuesta de ámbito nacional.

INTRODUCTION: Interstitial lung diseases (ILD) and, in particular, idiopathic pulmonary fibrosis, may have a significant impact on patient survival. Recent studies highlight the need for palliative care (PC) in the management of ILD patients. The aim of this study was to determine the current situation of PC in patients in Spain. METHODS: A 36-question survey addressing the main aspects of PC in ILD patients was designed. The survey was sent via email to all members of the Spanish Society of Pulmonology and Thoracic Surgery. Participation was voluntary. RESULTS: One hundred and sixty-four participants responded to the survey. Ninety-eight percent said they were interested in PC, 46% had received specific training, and 44% reported being responsible for PC in their ILD patients. Symptom control and end-of-life stage were the most frequent reasons for referral to PC teams. Regarding end-of-life, 78% reported consensual agreement with patients on the limitation of therapeutic efforts, 35% helped prepare an end-of-life advance directive, and 22% agreed on the place of death. CONCLUSION: Despite the well-known need for PC in patients with ILD and the notable interest of the survey participants in this subject, there are clear formative and organizational gaps that should be addressed to improve care in this area in ILD patients in Spain.

Multicolored Emission and Lasing in DCM-Adamantane Plasma Nanocomposite Optical Films.

We present a low-temperature versatile protocol for the fabrication of plasma nanocomposite thin films to act as tunable emitters and optical gain media. The films are obtained by the remote plasma-assisted deposition of a 4-(dicyano-methylene)-2-methyl-6-(4-dimethylamino-styryl)-4H-pyran (DCM) laser dye alongside adamantane. The experimental parameters that determine the concentration of the dye in the films and their optical properties, including light absorption, the refractive index, and luminescence, are evaluated. Amplified spontaneous emission experiments in the DCM/adamantane nanocomposite waveguides show the improvement of the copolymerized nanocomposites' properties compared to films that were deposited with DCM as the sole precursor. Moreover, one-dimensional distributed feed-back laser emission is demonstrated and characterized in some of the nanocomposite films that are studied. These results open new paths for the optimization of the optical and lasing properties of plasma nanocomposite polymers, which can be straightforwardly integrated as active components in optoelectronic devices.

Histiocitosis pulmonar de células de Langerhans en adultos: aproximación a la realidad española / Adult pulmonary Langerhans' cell histiocytosis: Approach to the reality of the Spanish population

No disponible

[Adult pulmonary Langerhans' cell histiocytosis: approach to the reality of the Spanish population]. / Histiocitosis pulmonar de células de Langerhans en adultos: aproximación a la realidad española.

BACKGROUND AND OBJECTIVE: Pulmonary Langerhans cell histiocytosis (PLCH) is a rare respiratory disease closely associated with smoking. The aim of the study is to know the reality of PLCH in the Catalonian population. MATERIAL AND METHODS: We included all patients diagnosed of PLCH in 8 different Catalonian hospitals from April 2011 to December 2012. Epidemiologic, clinical, radiological, functional, diagnostic and therapeutic variables were collected, both at the beginning and at the last visit of the process. RESULTS: Thirty two patients were included. Overall, patients were middle-aged (38 years), with no gender predominance. Most of them were smokers (71.9%). The main pulmonary function values (forced vital capacity 75.9%, forced expiratory volume in one second 68.9%, diffusing capacity of the lung for carbon monoxide 59.6%) and radiological findings (cysts 89.7%, nodules 60.3%) showed no significant changes during evolution. However, the disease progressed with a worsening lung function in 34.4% of cases. The analysis of the functional outcome (forced vital capacity, forced expiratory volume in one second, and diffusing capacity of the lung for carbon monoxide) did not reveal significant differences according to the persistence or not of smoking (P<0.05). CONCLUSION: Our patients with PLCH had similar clinical and radiological characteristics to those described in other populations. The results observed regarding the relationship with smoking suggest that there may be other factors beyond smoking, which influence on the evolution of the disease. It therefore seems advisable to design prospective studies to investigate this aspect.

Diverticular disease of the small bowel.

A diverticulum is a bulging sack in any portion of the gastrointestinal tract. The most common site for the formation of diverticula is the large intestine. Small intestine diverticular disease is much less common than colonic diverticular disease. The most common symptom is non-specific epigastric pain and a bloating sensation. Major complications include diverticulitis, gastrointestinal bleeding, acute perforation, pancreatic or biliary (in the case of duodenal diverticula) disease, intestinal obstruction, intestinal perforation, localized abscess, malabsorption, anemia, volvulus and bacterial overgrowth. We describe the clinical case of a 65-year-old female patient with a diagnosis on hospital admittance of acute appendicitis and a intraoperative finding of diverticular disease of the small intestine, accompanied by complications such as intestinal perforation, bleeding and abdominal sepsis. This was surgically treated with intestinal resection and ileostomy and a subsequent re-intervention comprising perforation of the ileostomy and stomal remodeling. The patient remained hospitalized for approximately 1 month with antibiotics and local surgical wound healing, as well as changes in her diet with food supplements and metabolic control. She showed a favorable clinical evolution and was dismissed from the hospital to her home. We include here a discussion on trends in medical and surgical aspects as well as early handling or appropriate management to reduce the risk of fatal complications.

Adapting ISA system warnings to enhance user acceptance.

Inappropriate speed is a major cause of traffic accidents. Different measures have been considered to control traffic speed, and intelligent speed adaptation (ISA) systems are one of the alternatives. These systems know the speed limits and try to improve compliance with them. This paper deals with an informative ISA system that provides the driver with an advance warning before reaching a road section with singular characteristics that require a lower safe speed than the current speed. In spite of the extensive tests performed using ISA systems, few works show how warnings can be adapted to the driver. This paper describes a method to adapt warning parameters (safe speed on curves, zone of influence of a singular stretch, deceleration process and reaction time) to normal driving behavior. The method is based on a set of tests with and without the ISA system. This adjustment, as well as the analysis of driver acceptance before and after the adaptation and changes in driver behavior (changes in speed and path) resulting from the tested ISA regarding a driver's normal driving style, is shown in this paper. The main conclusion is that acceptance by drivers increased significantly after redefining the warning parameters, but the effect of speed homogenization was not reduced.

Soft plasma processing of organic nanowires: a route for the fabrication of 1D organic heterostructures and the template synthesis of inorganic 1D nanostructures.

Hierarchical (branched) and hybrid metal-NPs/organic supported NWs are fabricated through controlled plasma processing of metalloporphyrin, metallophthalocyanine and perylene nanowires. The procedure is also applied for the development of a general template route for the synthesis of supported metal and metal oxide nanowires.

Rhodamine 6G and 800 J-heteroaggregates with enhanced acceptor luminescence (HEAL) adsorbed in transparent SiO2 GLAD thin films.

An enhanced fluorescent emission in the near infrared is observed when the Rhodamine 800 (Rh800) and 6G (Rh6G) dyes are coadsorbed in porous SiO(2) optical thin films prepared by glancing angle deposition (GLAD). This unusual behavior is not observed in solution and it has been ascribed to the formation of a new type of J-heteroaggregates with enhanced acceptor luminescence (HEAL). This article describes in detail and explains the main features of this new phenomenology previously referred in a short communication [J. R. Sánchez-Valencia, J. Toudert, L. González-García, A. R. González-Elipe and A. Barranco, Chem. Commun., 2010, 46, 4372-4374]. It is found that the efficiency and characteristics of the energy transfer process are dependent on the Rh6G/Rh800 concentration ratio which can be easily controlled by varying the pH of the solutions used for the infiltration of the molecules or by thermal treatments. A simple model has been proposed to account for the observed enhanced acceptor luminescence in which the heteroaggregates order themselves according to a "head to tail" configuration due to the geometrical constrains imposed by the SiO(2) porous matrix thin film. The thermal stability of the dye molecules within the films and basic optical (absorption and fluorescence) principles of the HEAL process are also described.

Primer reporte de actinomicosis pulmonar en la provincia de Ciego de Avila, Cuba

Se presenta el primer acaso reportado de actinomycosis pulmonar en la provincia de Ciego de avila, Cuba. El paciente presentó pérdida de peso, anorexia y fiebre vespertinas y en ocasiones, tos seca. En los exámenes, se observó una eritrosedimentación elevada, condensación de base derecha a la radiología de tórax, opacidad total de los bronquios del lóbulo inferior y parcialmente en los bronquios del lóbulo medio a la broncografía. Opacidad compatible con derrame interlobar, Se efectuó solo por biopsia el daignóstico de actinomicosis pulmonar. (AU)

Score de la reconstruccion del ligamento cruzado anterior con tecnica artroscopica / ACL reconstruction score with arthroscopic technique

Desde 1990 a 1994 realizamos 166 reconstrucciones del ligamento cruzado anterior (LCA) con tecnica hueso-tendon-hueso, por via artroscopica exclusivamente, de las cuales 161 corresponden a hombres y 5 a mujeres (resumen truncado)